Heat Protectant Spray — Private Label Hair Care UAE
Additional information
MOQ
Flexible
Turnaround
2-4 weeks
Quote
Within 24-48 hrs
Export
UAE · GCC · EU · USA
Free Formulation on orders above 20,000 AED ($5,500). T&C apply.
GMP-ISO 22716
Certified
ISO 14001
Environmental
Made in UAE
Sharjah
GCC Compliant
Export ready
About this formulation
The thermal protection mechanism operates through three simultaneous layers. First, a heat-activated silicone polymer (cyclopentasiloxane + amodimethicone) deposits a continuous, even thermal barrier film on the hair shaft that absorbs and distributes heat across a larger surface area — reducing peak temperature exposure at any single point on the hair. Second, hydrolysed keratin fills the micro-gaps and damaged areas of the cuticle that are the most thermally vulnerable — the areas where heat penetration to the cortex is fastest. Third, panthenol and glycerin maintain the hair’s own moisture content during heat exposure — preventing the rapid dehydration of the cortex that makes protein denaturation occur at lower temperatures than it otherwise would.
The formula is a lightweight water-based spray — not a heavy cream or serum — because the spray format is the only application method that distributes protection evenly across the entire hair shaft in the 5–10 seconds of application that realistic pre-styling time allows. The mist is fine enough for fine hair without adding weight, and concentrated enough for thick and coily hair to provide meaningful thermal coverage. The formula dries in under 60 seconds, leaving no visible residue, no greasy feel, and no interference with subsequent styling product application. It is invisible in the finished style.
Argan oil at a cosmetically appropriate concentration contributes Vitamin E antioxidant protection and cuticle-smoothing conditioning alongside the thermal protection — making the spray an active hair care product rather than merely a protective barrier. Every element customisable. Manufactured under ISO 22716 GMP in Sharjah, UAE.
Key benefits
- 230°C thermal protection — protects at the maximum temperature of professional hot tools, not just average consumer styling temperatures
- Triple-layer protection — thermal barrier film + keratin cuticle reinforcement + moisture retention — three simultaneous mechanisms
- Lightweight spray — dries in under 60 seconds; no residue, no greasiness; invisible in the finished style
- Argan oil conditioning — Vitamin E antioxidant protection and cuticle smoothing alongside the thermal barrier
- Hydrolysed keratin — fills cuticle micro-gaps that are the most thermally vulnerable points on the hair shaft
What's Inside?
Primary Thermal Barrier
Amodimethicone
Amodimethicone An amino-functional silicone that is the gold standard heat protectant active in professional salon formulations. Bonds selectively to the most porous, most thermally vulnerable areas of the hair cuticle — precisely where heat protection is needed most — through its amino groups' affinity for damaged hair protein. Creates a continuous, thermally stable film that is stable above 230°C without degrading. Unlike standard dimethicone (which sits uniformly on the surface), amodimethicone's selective deposition ensures concentrated protection at damage-prone areas. The ingredient that substantiates the 230°C protection claim with genuine mechanistic support.
Silicone Carrier & Thermal Enhancer
Cyclopentasiloxane
Cyclopentasiloxane (D5) A volatile cyclic silicone that acts as the carrier for amodimethicone — delivering it evenly across the hair surface before evaporating cleanly without residue. The volatile nature of cyclopentasiloxane (it evaporates at room temperature within 60–90 seconds of application) means it deposits the amodimethicone precisely where needed and then leaves — contributing zero weight, zero greasiness, and zero product feel to the finished style. Its own thermal stability in the brief evaporation window also contributes a secondary thermal buffering effect during the first pass of the heat tool.
Protein — Cuticle Gap Filling
Hydrolysed Keratin
Hydrolyzed Keratin In the heat protectant context, hydrolysed keratin serves a distinct role from its conditioning function in the styling cream — here it specifically targets the cuticle micro-gaps that create thermal vulnerability hot-spots. Small keratin fragments bond into these gaps before heat tool contact, raising the thermal resistance of the cuticle at its weakest points. With regular use before every heat styling session, this progressive cuticle infilling creates hair that is genuinely more heat-resistant over time — a cumulative benefit that distinguishes professional quality heat protectants from superficial thermal sprays.
Moisture Retention Under Heat
Panthenol (Vitamin B5)
Panthenol (D-Panthenol) In a heat protectant, panthenol's moisture-binding function is specifically about raising the thermal threshold for protein denaturation — dehydrated cortex proteins denature at lower temperatures than hydrated ones. By penetrating the cortex and binding water molecules to the keratin chains before heat contact, panthenol creates an internal moisture buffer that absorbs thermal energy (water's high specific heat capacity) before it translates into structural protein damage. After heat styling, panthenol also supports the cuticle's re-smoothing as it cools — contributing to the polished, smooth finish that good heat styling produces on protected hair.
Conditioning — UV & Antioxidant
Argan Oil (Cold-pressed)
Argania Spinosa Kernel Oil In a heat protectant spray at a light concentration (1–3%), argan oil contributes Vitamin E antioxidant protection that addresses a second major cause of heat-related hair damage — oxidative degradation. Heat styling in the presence of UV (outdoor UAE conditions between styling sessions) generates reactive oxygen species that degrade melanin pigment molecules and keratin protein — causing colour fading and structural weakening. Argan's tocopherol content neutralises these free radicals and provides a secondary protective mechanism alongside the silicone thermal barrier. Also contributes cuticle-smoothing oleic acid for post-style shine and frizz control in the UAE summer humidity.
Humectant — Moisture Buffer
Glycerin (Vegetable-derived)
Glycerin Works in synergy with panthenol as the second moisture-buffering humectant — glycerin in the cortex absorbs and holds additional water molecules that together raise the dehydration threshold during heat styling. In the UAE context where hot tools are used on hair that has already been partially dehydrated by air conditioning, glycerin's moisture-drawing function is particularly important — it actively draws moisture from the hair's own bound water and from any atmospheric humidity back into the cortex before the heat tool passes over. The combination of panthenol + glycerin creates a stronger moisture buffer than either alone.
Film-Former — Light Smoothing
PVP (Polyvinylpyrrolidone)
Polyvinylpyrrolidone A light film-forming polymer that contributes a secondary protective coating alongside the amodimethicone system and provides minor style-memory to the heat protectant spray — allowing it to contribute light hold alongside protection without any crunch or stiffness. PVP at low concentrations in a heat protectant creates a thin, continuous film that helps distribute heat evenly and smooths the cuticle surface before heat tool contact, reducing the mechanical friction between the iron plate or wand and the hair shaft — which is itself a source of thermal damage through friction-generated heat addition to the direct tool temperature.
Detangling — Pre-Styling
Behentrimonium Methosulfate
Behentrimonium Methosulfate Included at a low level in the heat protectant to provide pre-styling detangling — combing through tangled damp hair before heat styling is itself a major cause of breakage, as the mechanical stress of detangling wet, taut keratin chains breaks them at their weakest points. By reducing tangling during the post-spray distribution step, the cationic conditioning agent prevents the pre-styling breakage that undermines any heat protection benefit. Also contributes static reduction that prevents the hair from clinging and tangling under the heat tool during styling.
Full INCI list available once the formula and sample are approved. Formula can be adjusted to include or substitute any active
Make it yours — full customisation available
Formula customisation
Packaging Options
Label & Branding
Add-on Avtices from our Bank
Ideal for your sector
Hotels & Resorts
Bathroom amenity for the hair care conscious guest A heat protectant spray in the hotel bathroom amenity communicates premium hair care knowledge — most hotels provide shampoo, conditioner, and body wash, but very few address the heat styling need that the majority of female guests and many male guests have every morning. A branded 100ml heat protectant alongside the hotel's shampoo and conditioner creates a complete hair care amenity trio that distinguishes the property. Particularly relevant for UAE resort properties where guests style their hair before events, dinners, and excursions on every stay day.
Spa & Wellness Centers
Professional treatment ritual product In a hair spa, the heat protectant is used before every heat treatment application — keratin treatments, blow-out services, and hot oil treatments all involve heat tools, all require protection, and all create the retail purchase moment when the client wants to continue the professional care at home. A branded heat protectant spray is the most natural retail recommendation at the end of any heat-involving hair spa service — the client has already been told why it is needed, has already seen it used, and already understands its function before the retail pitch begins.
Gyms & Fitness Clubs
The post-workout blow-dry essential Gym members who blow-dry their hair in the locker room after workouts are using heat tools on already-stressed, sweat-affected hair — the highest-risk heat styling scenario. A branded gym heat protectant in a locker room dispenser or retail format serves a genuine functional need: members who use it can blow-dry their gym hair without compounding the damage already caused by the workout sweat and hard water wash. The spray format (versus cream or serum) is ideal for gym use — fast application, no mess on hands, and ready for the heat tool in under a minute.
Clinics & Medical Centers
Not Ideal
Retail Brands
The fastest-growing hair care segment in GCC Heat protectant is one of the most consistently searched and purchased hair care products across UAE e-commerce and pharmacy retail — driven by a population that uses heat tools daily and increasingly understands the damage they cause. A private label heat protectant with a clear "up to 230°C" claim, argan oil and keratin on the label, and clean packaging is a high-conversion pharmacy and online retail proposition. The UAE market is specifically underserved by products formulated for local climate conditions — a heat protectant with additional humidity-defence for UAE conditions is a commercially differentiated product that imported brands cannot match. LAB 03 FZC delivers shelf-ready in 4–6 weeks.
Who we also service
Our range covers corporate gifting programs · Airline amenity kits · Real estate developer handover gifts · Subscription box brands · Yacht & marine hospitality
Product Specifications
| Product type | Hair care — heat protectant spray / thermal protection leave-on (all hair types) |
| Thermal protection | Up to 230°C — the maximum temperature of professional salon hot tools |
| Protection system | Layer 01: Amodimethicone thermal barrier film · Layer 02: Hydrolysed Keratin cuticle infilling · Layer 03: Panthenol + Glycerin cortex moisture retention |
| Key actives | Amodimethicone · Cyclopentasiloxane · Hydrolyzed Keratin · Panthenol · Argania Spinosa Kernel Oil (Argan) · Glycerin · VP/VA Copolymer · Behentrimonium Methosulfate |
| Application method | Fine-mist spray to towel-dried damp hair · Allow 60 seconds to absorb · Style with heat tool |
| Dry time | Under 60 seconds on damp hair before heat tool contact |
| Residue | None — lightweight formula leaves no visible residue, no greasiness, no product feel |
| Fragrance | Unscented as standard / light fresh optional |
| Silicone-free option | Yes — Tapioca Starch + Rice Bran Wax film system; protection up to 180°C |
| Available sizes | 100ml (travel / amenity) · 150ml · 200ml · 250ml |
| Packaging formats | Fine-mist spray bottle (recommended) · Trigger spray (salon professional) |
| Hair types | Universal — straight, wavy, curly, and coily |
| Colour-safe | Yes — no colour-stripping agents; argan Vitamin E actively reduces UV colour fading |
| MOQ | Flexible — available on request |
| Production lead time | 2–4 weeks from formula approval |
| Shelf life | 24 months (unopened, stored correctly) |
| Preservation | Phenoxyethanol + Ethylhexylglycerin (paraben-free) |
| Free-from | Paraben-free · Sulphate-free · Cruelty-free · Alcohol-free |
| Vegan option | Yes — plant-derived keratin alternative available on request |
| Certifications | ISO 22716 GMP · ISO 14001 · EU Compliant · SFDA · USFDA |
| Halal availability | Yes — on request |
| Export markets | UAE · GCC · Saudi Arabia · EU · USA · Worldwide |
| Sampling | Samples available on request before production commitment |
| HS Code | 3305.90 — Preparations for use on the hair (other) |
| Manufactured in | Hamriyah Freezone Phase 2, Sharjah, United Arab Emirates |
Ready to launch this body lotion under your brand?
Receive a no-obligation quote within 24–48 hours.
